Fix Brother Printer Stuck on Sleep Mode – Brother Printer needs no introduction. This brand delivers printers that are widely used by printing geeks. The printing machines delivered by Brother are accepted and trusted by millions because of their user-friendly interface, easy handling, and low-cost printing. Because of such features, it is used at both professional places and at households as well. But many times many it halts the performance by entering into sleep mode. If you are facing such an issue with your Brother Printer and wanted to know how to Fix Brother Printer Stuck on Sleep Mode, then you have clicked on the right link.
Printer stuck in sleep mode is one of the most common technical defects that you may face with Brother Printer. Therefore, it is critical to know how to wake up the Brother Printer from sleep mode so that your printing work does not get affected. We understand the hassle and the frustration that you might have a face because of this issue. But don’t worry. You can check out this blog as in this blog we have covered the steps to Fix Brother Printer Stuck on Sleep Mode in detail.
Signs that Brother Printer Has Struck on Sleep Mode
A printer gets into sleep mode when it is not used for a particular period of time. The printer generally takes this action to save power. IN other words, if no activity or task is done for a specific period of time, the Brother Printer will be struck on Sleep Mode. But the real question arises, how to know whether your printer has struck on sleep mode? Well, here’s how you can identify:
- Dark control panel display.
- Dim power light.
- Slowly flashing power light.
If you are facing this same issue and wanted to know how you can Fix Brother Printer Stuck on Sleep Mode, then you can refer to the below-mentioned steps.
Common Checks to Determine the Brother Printer Struck in Sleep Mode
We have received numerous queries on How to Fix Brother Printer Struck on Sleep Mode. Therefore, our experts conducted research and find out several reasons that may trigger this issue. Harsh usage, gradual wear & tear, or any internal issue can command the device to enter sleep mode. If you are encountering such an issue, then you might prefer perfuming the following checks:
- Make sure that the device is connected properly and in On state.
- Check the wires attached to the Brother Printer including the power cord and USB cables.
- Make sure that there is a smooth and proper connection established between the printer and computer.
- Inspect the printer drivers and make sure that they are properly installed.
- Check the paper tray or ink cartridges as well.
Simple Steps to Fix Brother Printer Stuck on Sleep Mode
If you are a Brother Printer user and your device has now entered sleep mode, then you need to have a look at this blog. The time has come when we will disclose a simple series of steps to wake up Brother Printer from Sleep Mode. But make sure to follow all the steps in the exact same manner as mentioned without skipping anything. So, here are the steps to accomplish this task:
General Steps to Wake Up Brother Printer
- The first thing that you need to do is Navigate to Main Menu.
- Now press the General Setup option.
- Once done, click on Ecology and press the options Sleep Time.
- Write the time duration (choose between 0 to 99) for which the device needs to remain in the idle state.
- Click on the Start and Option button simultaneously to turn Off the Brother Printer Sleep Mode.
- On getting a Sleep Mode On prompt, use the Up & down buttons to turn the mode Off.
- Press Ok and Exit the setup.
- Once done with all the steps, restart the Brother Printer.
Reset the Device
If the above-provided methods did not come to your rescue, then you can reset the Brother printer to Fix the Brother Printer Stuck on Sleep Mode problem. But before resetting the device, make a backup of the data or logs. Here’s how you can reset the device:
- Press the Menu button and enter the Initial Setup using the down button.
- Press Ok.
- Navigate to the Reset option and press Ok.
- Now choose the Factory Reset option and press Ok.
- At last, press Ok to initiate the reset process.
Use Control Panel to Fix Brother Printer Stuck on Sleep Mode
As a last resort, you can use the control panel to get rid of this issue. Follow the below-mentioned steps to fix this technical malfunction:
- Open Control Panel.
- Select Devices and Printers.
- Now choose Printer Preferences.
- Click on the option to Disable Sleep Mode.
This bring us to the end of the blog. Through this blog we have highlighted the methods to Fix Brother Printer Stuck on Sleep Mode. You can try out these methods and get rid of this technical malfunction on your own. If you need more in-detail technical assistance against all your Brother Printer related concerns, then you can initiate the live chat.
