How to Fix Brother Printer Error TS-07 – Are you the one facing issues with your Brother Printer? You are struggling to fix the error TS-07? If yes, then this blog has the answers to all your questions. Through this article, our experts will take you through the Simple Troubleshooting Methods to Fix Brother Printer Error TS-07. Brother is a reliable brand that is opted by millions of people to satisfy their printing needs. These devices are heavily used in offices, homes, and even educational institutions. Thus fixing the issues associated with such a device becomes a must.
The printers offered by Brother reflect sheer class, superior built quality, reliable service, and low-cost printing. But being an electronic devices, they are prone to encounter technical issues. A lot of Brother Printer users have recently reported the Error TS-07 with their devices. It is a common issue that can be fixed by adhering to a simple series of steps. So, if you are facing the same issue and wondering How to Fix Brother Printer Error TS-07, then you have landed in the right place. This blog by Weservice247 will highly the easy ways to get this task done at your home.
Reasons Why Brother Printer Shows Error TS-07
Knowing the causes or reasons behind the error will help with the overall better understanding of the problem. This will also help with the resolution as well. Therefore, before moving on to the Troubleshooting Methods to Fix Brother Printer Error TS-07, let us go through the reasons behind this error:
- Unable to detect any WLAN access point.
- The inability of the device to detect the router.
- Internet issues.
- Corrupted drivers.
- Hardware issues.
Troubleshooting Methods to Fix Brother Printer Error TS-07
Now it’s time when we will tell you the easy way outs to fix the Error TS-07 assoicated with the Brother Printer. This section of the blog will exclusively cover the necessary steps that you need to go through to eradicate this error from its roots and get your Brother Printer into its working state.
Step 1: Start the troubleshooting process by making sure that your Router and WLAN access points support AOSS and WPS. You can get this detail easily by checking the router or the paper that you obtained with your router or WLAN access point
Step 2: If it is enabled, then all you have to do is now use the WPS or AOSS (automatic wireless mode) and configure the wireless settings.
Step 3: Once done, make sure to get access to both the router or WLAN access point and device.
Step 4: Place the device and router or WLAN Access point close to each other to avoid any unwanted internet interruption.
Step 5: Remove all the objects that could potentially interfere with the signals. Objects such as mobiles, fridge, etc. need to be removed away from the WLAN access point or router.
Step 6: Once done, on the Brother printer, press the Menu Button and choose the option Network and click on Ok.
Step 7: Navigate using the arrow keys and move to the WLAN network option click on it and press Ok.
Step 8: Now, search for AOSS or WPS option.
Step 9: Choose AOSS or WPS option and click on Ok.
Step 10: Here, you have to click on Accept to disable wired network settings.
Step 11: Click on Ok in case you get the message indicating Enable WLAN or Network I/F switched to Wireless.
Step 12: Once done, press and hold the WPS button and press Ok.
Step 13: Wait for some time and let the Brother Printer detect the WPN access point mode and establish a connection with wireless network.
Step 14: Here, the WLAN report will be displayed on the display screen of the Brother Printer and will be automatically printed.
Step 15: Check whether the issue has been fixed or not.
Reboot Brother Printer
If the above method did not resolve the issue, then you can try the steps mentioned below to wipe out this error. Here is How to Fix Brother Printer Error TS-07 through this method:
Step 1: Switch off the Brother Printer.
Step 2: Remove all wires attached to the device such as USB cable, Power cable, etc.
Step 3: Wait for a few seconds before performing the next step.
Step 4: Re-attach all the wires to the device such as USB cable, Power cable, etc.
Step 5: Turn on the device and check whether the issue has been fixed or not.
So, this is How to Fix Brother Printer Error TS-07. You can follow the steps mentioned above and fix the Error TS-07 assoicated with the Brother Printer. All the methods and the steps mentioned above are tested and listed after deep research. We hope you liked this blog and the troubleshooting support for which you came here has been provided to you. In case you face any trouble while following the steps mentioned above, then do not hesitate to talk to our experts by initiating the live chat.