January 24, 2022 Hp Printer Tech support 0 Comment

Why My HP Printer Stopped Working Wirelessly – Every electronic device whether it is a printer or any other equipment encounter technical error or glitches. But that does not mean they cannot be fixed. The troubleshooting methods and the route to fix the errors will differ from the type of error. If you are an HP Printer user whose device is not working properly and who is wondering Why My HP Printer Stopped Working Wirelessly, then you can read this blog to find out all your answers. HP is a wonderful brand that manufactures superior quality printing devices. The gadgets offered by HP come along with many irresistible functionalities that will leave you mesmerized.

Superior built quality, low-cost printing, and anywhere printing, etc. are the few things that you can expect from an HP printer. But despite having such features, these devices can face technical issues. Each error is different and the route map to fix such issues will also be based on the type of the error. Thus, if you are thinking Why My HP Printer Stopped Working Wirelessly, then consider reading this blog till the end to find out the exact methods that you need to perform to wipe this issue out and bring back your device into the working state.

Major Culprits Due to Which HP Printer Stopped Working Wirelessly

There is a definite reason why your printer behaves normally. A lot of things can be blamed if in case your device suddenly refused to work wirelessly. Thus, before we move towards the troubleshooting steps, let us find out what exactly is restricting the printer to work wirelessly:

  1. Disturbed or no connection between the HP Printer and the router.
  2. Changed router settings.
  3. Corrupted drivers.
  4. Incomplete or failed update.
  5. Changed IP address of the device.

Troubleshooting Methods to Fix HP Printer Stopped Working Wirelessly

Find below the simple procedures and methods to eradicate this issue. The methods mentioned below will allow your device to work wirelessly. But make sure to follow the provided methods along with their steps in the same order as they are written. If you are wondering Why My HP Printer Stopped Working Wirelessly, then follow these methods:

Restart the HP Printer

The primary task that you need to perform is to restart your device. Doing this allows your device to fix some of the minor glitches associated with it. Here are the steps to restart the HP printer:

  1. Start the process by pressing the power button on your HP Printer.
  2. Press and hold the Power button to switch off the device.
  3. Now, unplug all the wires attached to the device like USB cable, power cord, etc.
  4. Wait for a few seconds.
  5. Now, replug the wires back to the device (USB cable and power cord).
  6. Press and hold the Power button again to turn on the HP printer.
  7. Let the device switch on and come into a stable position.
  8. Now, check whether the issue has been fixed or not.

Reset Wireless Router

A faulty or defective router may halt the working of the HP Printer. HP Printer requires a smooth and working internet connection to work wirelessly. Thus, make sure to check your router if you are wondering Why My HP Printer Stopped Working Wirelessly. Although, the process to reset the router will differ from manufacturer to manufacturer. But here we will provide you with a standardized procedure that you can follow to reset the router. Here are the steps to reset the wireless router:

  1. Go to your Wireless Router and make sure it is plugged in.
  2. Press the Reset button located on the router.
  3. The reset button will be located at the bottom of the wireless router.
  4. You can take the help of a paperclip to press and hold down the reset button.
  5. Hold the Reset button for at least 30 seconds.
  6. Now, release the reset button and wait till the wireless router powers back on.

Alternate Troubleshooting to Fix HP Printer Stopped Working Wirelessly

If the above two methods did not come to your rescue, then you can try out the steps mentioned below to fix this problem. These are:

  1. Make sure that your device is properly attached and connected to the Wi-Fi router.
  2. Check all the wires and make sure they are not defected or broken.
  3. Uninstall and reinstall the updates.
  4. Disconnect the VPN (Virtual Private Network.
  5. Make sure to inspect the IP address of the device. If the IP address is changed then make sure to update it to the new address.

So, if you are thinking Why My HP Printer Stopped Working Wirelessly, then you can try these methods and bring back your printer into the working state. If in case you find any hassle while performing the steps provided above, then feel free to contact our experts by initiating the live chat.